Skip to main content

Free Motion Quilting and more on the Microstitch gun

After I posted earlier this week I had a few questions about the Microstitch gun I had mentioned. I had heard about it from a friend and recently my supplier of reasonably priced basting spray (which I love) has stopped shipping it (something about spray cans and the Royal Mail....). And me and pin basting are not friends....


Before I go any further, I paid for mine, I'm not being asked to review by a supplier etc,. I got mine from Amazon in the UK for approx £23. It works by firing little plastic tags through the layers of your quilt - like the tags you get on new clothes, but smaller. The gun came with 1800 tags half in white and half in black.

I basted four quilts: The City Sampler at 90"x 90", a lap quilt and two baby quilts, and I used about half of the supplied tags. It seems pretty easy to buy additional tags and probably works out cheaper than the basting spray overall.

If you aren't comfortable spray basting larger quilts, then this is a good alternative - I have basted and quilted a 116" x 116" quilt with no bother though. This system also removes the need to for chemical glue and spray which is another good thing in a house with a new baby.

There were a couple of disadvantages with the basting: to put the tag through the layers, you push the needle on the gun through all layers and pull the trigger. The needle is not tiny. With regular cotton I think it will be fine and washing will return the threads, but with the finer weaaves such as Art Gallery I'm not so sure. I'll have to pop a tag in an Art Gallery part of my Arabella Hexagon quilt and report back.

The needle was a bit temperamental, but I quickly learned what I was doing wrong, and could avoid it for the most part, and knew how to fix it once there was a problem.


The final disadvantage versus spray basting (but not pin basting) is the need to list the quilt from the table to get the needle through.

Today I quilted this, pieced by my mother-in-law. It quilted up just as well as spray basted quilts. I purposely quilted over a couple of the tags and I had no issues at all.


So far, so good. I have a feeling that the most annoying part will be going over the quilt and removing all the tags once I'm done - for this reason I basted in a grid so finding the tags would be easier.

My weekend will be a combination of more quilting - two baby quilts - the plan is spirals. Big ones. And a grizzly baby who had her first immunisations today.

Comments

Hmmmm......interesting follow up. I've wanted to try already basting but can't due to asthma, so I sure have been curious about this alternative. Seems to me that, as you said, removing the little buggers later could be a chore. So are pins. Definitely going to consider this, thanks!
ittehgaps said…
I have been basting with one of these basting guns for several yrs. My mother had a very old kit that was meant to be used to attach buttons and when I started quilting I tried it on my quilt. Back in the 70s long before they were even used in retail stores to attach price tags. It is efficient for the most part. But every once in a while it will jam and you have to be careful unjamming as I bent a needle and had to replace it. Not sure if it has to do with the quality of the tags. Depending on the nap of your carpet you can baste without worrying about it sticking to the carpet. Do NOT baste on a berber or looped carpet! There is a plastic grid you can get to lift your quilt off the work surface. I use a strip of similar gridded plastic that was used as a light cover for fluorescent lights that I salvaged from the garbage when we were remodeling our basement yrs ago. I have never pin basted a quilt. I have used spray baste and an old fashioned curved needle and thread. I usually snip about half the tags as I come to them in my quilting but also go over it when I am done to remove all the rest. Not a big deal because it gives me a chance for a thorough inspection. I find the basting gun to be the easiest. Cindy
Thanks so much for this review. I've never seen a micro stitch gun, and the concept seems really interesting. As of now, I'm pin basting everything. I do have spray baste, but I've never gotten the hang of it.
This is very useful. I am pin basting, but was thinking about bying a sray. This gun seems a nice alternative. thank you.
wonderful posting digitizing company thanks for sharing ..

Popular posts from this blog

365 Quilt Challenge 2016 [A finish]

I can't believe I've just typed that heading! When I made the block for January 1st 2016 I could not have imagined the journey this quilt would have taken me on. So make yourselves comfortable and grab a cup of tea, because this blog post may get lengthy! I'd seen the 365 Quilt Challenge on Facebook. I think every quilter on Facebook must have been aware of it. Loads of my friends had signed up and it kept popping up as a "Page you might like" thing. In the end, in November 2015, I joined the group, had a poke round. Decided it wasn't for me. One of the things that really put me off were the fabric requirements: you needed x amount of dark dark fabric, x amount of medium dark fabric, x amount of dark medium, medium, light medium, light, background.... I just couldn't get my head round those requirements. I'd looked at the mock ups on the wesbite and couldn't bring myself to pick a colour. I put it to the back of my mind. But I had obvious...

Tula Nova [A Finish]

I can't believe it's been nearly two years since an epic day out in Huddersfield with the amazing Tula Pink. That day at Simply Solids was pretty close to the best day ever: a morning lecture by Tula where we got to see some of her quilts - and the amazing quilting by Angela Walters - and then an afternoon workshop with her starting work on the Tula Nova pattern. The centre that I made that day became a cushion, but I redid my centre and kept going with a rainbow or stars around it to create my final Tula Nova. All of the print fabrics are Tula All Stars with Pompoms and Stripes. The solids are all Kona. This was my first real time working with Tula Pink fabrics. I'd long been a fan of her patterns, but not her fabric. After this day I was a convert. We won't discuss how much Tula fabric I now have, nor how many of my current WIPs are Tula WIPs! But this was the start. The medallion is all hand pieced using English Paper Piecing. I learned about fussy cutting to...

All the Little Finishes

 I've had a few recent finishes - mostly smaller pieces and mostly not on my list to finish this year (because I've only just started them!) - lots and lots of pouches! Here's a round up... Three pouches I made for the kids for our holiday - all are the Seamingly Sane Pouch pattern, but I used the pattern add-on to adjust the sizes and customised with some straps and in one case, a pocket. These three pouches are made for our work Yubikeys when we travel to protect them - it's a slightly adjusted Aneela Hooey pattern - the peas are an inside joke! I knew I had pea fabric for a reason! A couple more Seamingly Sane pouches - the smaller one was a birthday present for my Dad, and the floral one was for me to protect my diary when I travel. Seven pouches made entirely from my scraps to hold EPP pieces pre sewing! This is the Peekapouch pattern by Sweet Cinnamon Roses. This is the Not So Little Zippy Pouch by Fabric and Flowers. The pattern is a bit of a challenge, but this ...

Labels

Show more

Archive

Show more